22mm OD Planetary Gearbox.Permissible Load Range: 0.15N.m~1.5N.m
Wire Diagram
Connector | Pin | Functions | Description |
FPC | 1 | Vcc | Hall power source input +5VDC～+24VDC |
2 | Hall W | ||
3 | Hall U | ||
4 | Hall V | ||
5 | GND | Hall ground | |
6 | Phase W | ||
7 | Phase V | ||
8 | Phase U |
Brushless Motor Technical Data
Type | Number of poles | Number of phase | Rated voltage VDC | No-load speed r/min | Rated speed r/min | Rated torque mN.m | Rated power W | Reak torque mN.m | Peak current A | Line to line resistance ohms | Line to line inductance mH |
FL2OBLW14-12V-5105A | 8 | 3 | 12 | 9530 | 5170 | 7.59 | 5 | 19 | 1.62 | 7.2 | 0.62 |
FL2OBLW14-24V-5105A | 8 | 3 | 24 | 9530 | 5220 | 4.74 | 5 | 20 | 0.85 | 26.1 | 2.6 |
Brushless Gear Motor Technical Data
FL2OBLW14-12V-5105A BLDC Motor
Reduction rati | 3.71 | 5.18 | 14 | 19 | 27 | 51 | 71 | 100 | 139 | 189 | 264 | 369 |
Number of gear trains | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 4 | 4 | 4 |
Length(L) mm | 25.4 | 25.4 | 34.0 | 34.0 | 34.0 | 42.4 | 42.4 | 42.4 | 42.4 | 50.8 | 50.8 | 50.8 |
No-load speed r/min | 2534 | 1815 | 671 | 495 | 348 | 184 | 132 | 94 | 68 | 50 | 36 | 25 |
Rated speed r/min | 1394 | 998 | 369 | 272 | 191 | 101 | 73 | 52 | 37 | 27 | 20 | 14 |
Rated torque N.m | 0.025 | 0.035 | 0.086 | 0.12 | 0.17 | 0.28 | 0.39 | 0.55 | 0.77 | 0.93 | 1.3 | 1.5 |
N.m Max. permissible load in a short time | 0.4 | 0.4 | 1.5 | 1.5 | 1.5 | 3 | 3 | 3 | 3 | 4 | 4 | 4 |
FL2OBLW14-24V-5105ABLDC Motor
Reduction ratio | 3.71 | 5.18 | 14 | 19 | 27 | 51 | 71 | 100 | 139 | 189 | 264 | 369 |
Number of gear trains | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 4 | 4 | 4 |
Length(L) mm | 25.4 | 25.4 | 34.0 | 34.0 | 34.0 | 42.4 | 42.4 | 42.4 | 42.4 | 50.8 | 50.8 | 50.8 |
No-load speed r/min | 2534 | 1815 | 671 | 495 | 348 | 184 | 132 | 94 | 68 | 50 | 36 | 25 |
Rated speed r/min | 1407 | 1008 | 373 | 275 | 193 | 102 | 74 | 52 | 38 | 28 | 20 | 14 |
Rated torque N.m | 0.026 | 0.036 | 0.088 | 0.12 | 0.17 | 0.29 | 0.40 | 0.57 | 0.79 | 0.95 | 1.3 | 1.5 |
N.m Max. permissible load in a short time | 0.4 | 0.4 | 1.5 | 1.5 | 1.5 | 3 | 3 | 3 | 3 | 4 | 4 | 4 |
Dimensions
The outer rotor motor gets its name because the rotor is on the outside,
and it is characterized by small size (short length), light weight,and large output torque.
- Last：32JM50K/32BLW
- Next：no more