3 phase 3MS60M

3 Phase Stepping Driver:3MS60M 



  • High performance, low price;
  • Provides 16 kinds microstep selection,resolution can be set to 60000pulse/rev.
  • Once the pulse stops for 100ms,phase current automatically reduce to a half.
  • Bipolar constant current chopper control.
  • Photocoupler isolated input/output.
  • Adjustable drive current range from 0.2A-5.8A;
  • Single power input, voltage range from DC16-60V;
  • The upmost pulse response frequence amounts to 200Kpps.
  • Overheat protection&Overcurrent, under voltage protection.
  •  Dimension: 25x136x92mm3 ,Net Weight:0.3kg.

Microstep Setting: 

Terminal Assignment:

Running current Setting                                    Size:
Function Setting 
:                                                  Input signal timing diagram:
Driver connection:


1. Do not reverse the power input,input voltage should not exceed DC60V。
2. Input logic should be 5V,otherwise it should connect a resistor
3. O.H is malfunction indicator. Once the driver temperature exceeds 70°C,the current will be cut off automatically and the driver will resume working till the temperature drops to 50°C. If this happens,please install ventilation equipment.
4. Once over current (short circuit)/under voltage occur, LED O.C lights, please shut off power and check the electricity circuit to solve the problem, then restore power supply.
5. PWR is power indicator,it lights when power on.
6. Passing the origin or there is pulse output, TM LED lights 


Tel:+0086 25 83317372 Fax:+0086 25 83317372
E-mail:sales@ms-motor.com ; msmotor@126.com